Estimated Delivery: 1–4 Weeks
Precisely engineered for the 2026/2027 Tesla Model Y Juniper, these side skirts deliver a seamless, aggressive, factory-style fit. Designed to follow the vehicle’s natural body lines, they enhance the lower profile of the Model Y while giving it a sportier and more refined appearance.
Crafted from high-grade ABS material, these side skirts provide excellent durability and impact resistance while maintaining a sleek, glossy carbon fiber finish. Please note: this product is not made of real carbon fiber. The durable construction is designed to withstand normal road and weather conditions while preserving its polished appearance over time.
The side skirts install using a combination of double-sided automotive adhesive and self-tapping screws for a strong and secure fit. Each side skirt is assembled before installation and then aligned along the factory rocker panel underneath the vehicle.
For easier access underneath the vehicle, the use of car ramps or an appropriate lifting method is strongly recommended. Always make sure the vehicle is securely supported before beginning installation.
1 × Driver-Side Side Skirt Assembly
1 × Passenger-Side Side Skirt Assembly
Double-Sided Automotive Adhesive
Mounting Screws / Installation Hardware
Lift the Vehicle
Place the front wheels securely on car ramps to provide additional clearance underneath the vehicle. If two sets of ramps are available, both the front and rear of the vehicle can be raised for easier installation.
Assemble the Side Skirt
Connect the two sections of each side skirt using the supplied screws. Make sure both sections are properly aligned and securely connected before mounting them to the vehicle.
Apply the Double-Sided Tape
Apply the included double-sided automotive adhesive along the upper mounting surface of the side skirt. Make sure the mounting surface is clean and dry before applying the tape.
Position the Side Skirt
Carefully position the assembled side skirt underneath the vehicle. Align the front of the skirt with the front wheel arch and confirm that the entire skirt follows the rocker panel evenly. Once properly positioned, press upward firmly so the adhesive makes contact with the underside of the vehicle.
Install the Initial Screws
While holding the side skirt securely in position, install one self-tapping screw near the front and another toward the rear. These initial screws will help keep the skirt properly aligned while the remaining mounting points are secured.
Install the Remaining Screws
Use the pre-drilled mounting holes as a guide and install the remaining self-tapping screws along the underside of the side skirt. Typically, approximately 10–12 mounting screws may be used across each installation. Additional screws may be added near the ends for extra support if desired.
Reposition the Vehicle if Needed
If only one set of ramps is being used, carefully move the ramps from the front wheels to the rear wheels to gain access to the remaining mounting points. Complete the same installation process for the rear portion of the side skirt.
Final Check
Verify that all screws are secure without being overtightened. Check that the side skirt is straight, properly aligned, firmly attached, and evenly seated against the vehicle.
*Important: Always use properly rated ramps, jack stands, or another secure lifting method when working underneath the vehicle. Never work underneath a vehicle supported only by a jack.
